#compdef imsg

autoload -U is-at-least

_imsg() {
    typeset -A opt_args
    typeset -a _arguments_options
    local ret=1

    if is-at-least 5.2; then
        _arguments_options=(-s -S -C)
    else
        _arguments_options=(-s -C)
    fi

    local context curcontext="$curcontext" state line
    _arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
'-V[Print version]' \
'--version[Print version]' \
":: :_imsg_commands" \
"*::: :->imsg" \
&& ret=0
    case $state in
    (imsg)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-command-$line[1]:"
        case $line[1] in
            (send)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
':number -- Recipient phone number:_default' \
':message -- Message body:_default' \
&& ret=0
;;
(list)
_arguments "${_arguments_options[@]}" : \
'--from=[Filter by originating address]:NUMBER:_default' \
'--since=[Filter to messages at or after this MAP timestamp (\`YYYYMMDDTHHMMSS\`)]:DATE:_default' \
'--limit=[Maximum number of entries to return]:N:_default' \
'--offset=[Skip the first N entries (pagination)]:N:_default' \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--unread[Only unread messages]' \
'-l[Show the raw MAP handle for each message (for use with \`get\`/\`delete\`)]' \
'--long[Show the raw MAP handle for each message (for use with \`get\`/\`delete\`)]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help (see more with '\''--help'\'')]' \
'--help[Print help (see more with '\''--help'\'')]' \
'::folder -- Folder to list; defaults to inbox:((inbox\:"Received messages"
sent\:"Sent messages"
outbox\:"Pending outbound messages"
deleted\:"Deleted messages"))' \
&& ret=0
;;
(get)
_arguments "${_arguments_options[@]}" : \
'--folder=[Folder the handle lives in; defaults to inbox]:FOLDER:((inbox\:"Received messages"
sent\:"Sent messages"
outbox\:"Pending outbound messages"
deleted\:"Deleted messages"))' \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--mark-read[Mark the message read after fetching]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help (see more with '\''--help'\'')]' \
'--help[Print help (see more with '\''--help'\'')]' \
':handle -- Message handle:_default' \
&& ret=0
;;
(delete)
_arguments "${_arguments_options[@]}" : \
'--folder=[Folder the handle lives in; defaults to inbox]:FOLDER:((inbox\:"Received messages"
sent\:"Sent messages"
outbox\:"Pending outbound messages"
deleted\:"Deleted messages"))' \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--undelete[Restore a previously deleted message instead of deleting it]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help (see more with '\''--help'\'')]' \
'--help[Print help (see more with '\''--help'\'')]' \
':handle -- Message handle:_default' \
&& ret=0
;;
(contacts)
_arguments "${_arguments_options[@]}" : \
'(--lookup --sync)--get=[Fetch a single contact\: a PBAP handle live/via broker, or a cached UID once opted in (matches whatever \`--list\` just printed in that mode)]:KEY:_default' \
'(--sync)--lookup=[Reverse-lookup a contact by phone number]:NUMBER:_default' \
'--path=[Phonebook to read. No effect on \`--sync\` (always the main phonebook)]:PATH:((pb\:"Main phonebook"
ich\:"Incoming call history"
och\:"Outgoing call history"
mch\:"Missed call history"
cch\:"Combined call history"
spd\:"Speed-dial entries"
fav\:"Favourites"))' \
'--limit=[Maximum contacts per page; omit to show all. No effect on \`--sync\`]:N:_default' \
'--page=[Page number (1-indexed). Ignored when \`--limit\` is not set. No effect on \`--sync\`]:N:_default' \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'(--get --lookup --sync)--list[List handles/UIDs and names only, without full vCards]' \
'--sync[Refresh the local contacts cache from the device. No effect from \`--raw\`/\`--limit\`/ \`--page\`; always syncs the main phonebook regardless of \`--path\`]' \
'--raw[Show phone numbers as stored; skip E.164 normalisation. No effect on \`--list\`/\`--sync\`]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help (see more with '\''--help'\'')]' \
'--help[Print help (see more with '\''--help'\'')]' \
&& ret=0
;;
(threads)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(sync)
_arguments "${_arguments_options[@]}" : \
'--folder=[Restrict the backfill to a single folder; omit to sync all folders]:FOLDER:((inbox\:"Received messages"
sent\:"Sent messages"
outbox\:"Pending outbound messages"
deleted\:"Deleted messages"))' \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help (see more with '\''--help'\'')]' \
'--help[Print help (see more with '\''--help'\'')]' \
&& ret=0
;;
(unsync)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--purge[Delete the database file and all synced data in addition to disabling sync]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(folders)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(hub)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(spoke)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
":: :_imsg__subcmd__spoke_commands" \
"*::: :->spoke" \
&& ret=0

    case $state in
    (spoke)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-spoke-command-$line[1]:"
        case $line[1] in
            (add)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
':key -- iroh hub node key (printed by `imsg hub`):_default' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__spoke__subcmd__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-spoke-help-command-$line[1]:"
        case $line[1] in
            (add)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(config)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
":: :_imsg__subcmd__config_commands" \
"*::: :->config" \
&& ret=0

    case $state in
    (config)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-config-command-$line[1]:"
        case $line[1] in
            (show)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(set-device)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
':address -- Bluetooth MAC address (`XX\:XX\:XX\:XX\:XX\:XX`):_default' \
&& ret=0
;;
(setup)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__config__subcmd__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-config-help-command-$line[1]:"
        case $line[1] in
            (show)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(set-device)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(setup)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(broker)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
":: :_imsg__subcmd__broker_commands" \
"*::: :->broker" \
&& ret=0

    case $state in
    (broker)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-broker-command-$line[1]:"
        case $line[1] in
            (status)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__broker__subcmd__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-broker-help-command-$line[1]:"
        case $line[1] in
            (status)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(__broker_serve)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(daemon)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
":: :_imsg__subcmd__daemon_commands" \
"*::: :->daemon" \
&& ret=0

    case $state in
    (daemon)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-daemon-command-$line[1]:"
        case $line[1] in
            (start)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--foreground[Stay attached instead of detaching — required under a process supervisor (e.g. a systemd unit). Stops on Ctrl-C, SIGTERM, or an IPC \`Shutdown\` request]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(stop)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(status)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(install)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--system[Register system-wide instead of for the current user only. Typically requires elevated privileges to install]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--system[Match the \`--system\`/user scope the service was installed with]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__daemon__subcmd__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-daemon-help-command-$line[1]:"
        case $line[1] in
            (start)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(stop)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(status)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(install)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(completions)
_arguments "${_arguments_options[@]}" : \
'--device=[Override the configured device MAC address (RFCOMM only)]:ADDR:_default' \
'--config=[Explicit config file path, overriding the layered default search]:PATH:_files' \
'--install[Write the script to the shell'\''s conventional completion directory instead of printing it, after an interactive confirmation. Not supported for every shell]' \
'--hub[Route MAP and PBAP connections through the iroh hub configured via \`imsg spoke add\`]' \
'*-v[Increase logging verbosity]' \
'*--verbose[Increase logging verbosity]' \
'(-v --verbose)*-q[Decrease logging verbosity]' \
'(-v --verbose)*--quiet[Decrease logging verbosity]' \
'-h[Print help (see more with '\''--help'\'')]' \
'--help[Print help (see more with '\''--help'\'')]' \
':shell -- Target shell:(bash elvish fish powershell zsh)' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-help-command-$line[1]:"
        case $line[1] in
            (send)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(list)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(get)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(delete)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(contacts)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(threads)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(sync)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(unsync)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(folders)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(hub)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(spoke)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__help__subcmd__spoke_commands" \
"*::: :->spoke" \
&& ret=0

    case $state in
    (spoke)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-help-spoke-command-$line[1]:"
        case $line[1] in
            (add)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
(config)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__help__subcmd__config_commands" \
"*::: :->config" \
&& ret=0

    case $state in
    (config)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-help-config-command-$line[1]:"
        case $line[1] in
            (show)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(set-device)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(setup)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
(broker)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__help__subcmd__broker_commands" \
"*::: :->broker" \
&& ret=0

    case $state in
    (broker)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-help-broker-command-$line[1]:"
        case $line[1] in
            (status)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
(__broker_serve)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(daemon)
_arguments "${_arguments_options[@]}" : \
":: :_imsg__subcmd__help__subcmd__daemon_commands" \
"*::: :->daemon" \
&& ret=0

    case $state in
    (daemon)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:imsg-help-daemon-command-$line[1]:"
        case $line[1] in
            (start)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(stop)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(status)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(install)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
(completions)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" : \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
}

(( $+functions[_imsg_commands] )) ||
_imsg_commands() {
    local commands; commands=(
'send:Send an SMS to a phone number' \
'list:List messages in a folder' \
'get:Fetch one message body by handle' \
'delete:Delete (or undelete) a message by handle' \
'contacts:Pull contacts from a phonebook' \
'threads:Group inbox and sent messages into conversation threads' \
'sync:Backfill the local store with all messages from the device since the last sync' \
'unsync:Stop using the local store for reads; synced data is preserved by default' \
'folders:List the MAP message folders on the device' \
'hub:Start the iroh hub on this machine and print the node key for spokes' \
'spoke:Manage spoke configuration for connecting to a remote hub' \
'config:Inspect or modify local configuration' \
'broker:Query the session broker' \
'__broker_serve:Internal\: session broker process, auto-started by the CLI — not for direct invocation' \
'daemon:Manage the persistent background broker (opt-in; required for GUI use)' \
'completions:Print a shell completion script to stdout, or install it directly' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg commands' commands "$@"
}
(( $+functions[_imsg__subcmd____broker_serve_commands] )) ||
_imsg__subcmd____broker_serve_commands() {
    local commands; commands=()
    _describe -t commands 'imsg __broker_serve commands' commands "$@"
}
(( $+functions[_imsg__subcmd__broker_commands] )) ||
_imsg__subcmd__broker_commands() {
    local commands; commands=(
'status:Report whether the broker is running and whether its MAP session is connected' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg broker commands' commands "$@"
}
(( $+functions[_imsg__subcmd__broker__subcmd__help_commands] )) ||
_imsg__subcmd__broker__subcmd__help_commands() {
    local commands; commands=(
'status:Report whether the broker is running and whether its MAP session is connected' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg broker help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__broker__subcmd__help__subcmd__help_commands] )) ||
_imsg__subcmd__broker__subcmd__help__subcmd__help_commands() {
    local commands; commands=()
    _describe -t commands 'imsg broker help help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__broker__subcmd__help__subcmd__status_commands] )) ||
_imsg__subcmd__broker__subcmd__help__subcmd__status_commands() {
    local commands; commands=()
    _describe -t commands 'imsg broker help status commands' commands "$@"
}
(( $+functions[_imsg__subcmd__broker__subcmd__status_commands] )) ||
_imsg__subcmd__broker__subcmd__status_commands() {
    local commands; commands=()
    _describe -t commands 'imsg broker status commands' commands "$@"
}
(( $+functions[_imsg__subcmd__completions_commands] )) ||
_imsg__subcmd__completions_commands() {
    local commands; commands=()
    _describe -t commands 'imsg completions commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config_commands] )) ||
_imsg__subcmd__config_commands() {
    local commands; commands=(
'show:Print the resolved configuration' \
'set-device:Persist the device MAC address to the user config file' \
'setup:Interactively pick a paired device, resolve its MAP/PBAP channels over SDP, and persist address + both channels together' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg config commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__help_commands] )) ||
_imsg__subcmd__config__subcmd__help_commands() {
    local commands; commands=(
'show:Print the resolved configuration' \
'set-device:Persist the device MAC address to the user config file' \
'setup:Interactively pick a paired device, resolve its MAP/PBAP channels over SDP, and persist address + both channels together' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg config help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__help__subcmd__help_commands] )) ||
_imsg__subcmd__config__subcmd__help__subcmd__help_commands() {
    local commands; commands=()
    _describe -t commands 'imsg config help help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__help__subcmd__set-device_commands] )) ||
_imsg__subcmd__config__subcmd__help__subcmd__set-device_commands() {
    local commands; commands=()
    _describe -t commands 'imsg config help set-device commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__help__subcmd__setup_commands] )) ||
_imsg__subcmd__config__subcmd__help__subcmd__setup_commands() {
    local commands; commands=()
    _describe -t commands 'imsg config help setup commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__help__subcmd__show_commands] )) ||
_imsg__subcmd__config__subcmd__help__subcmd__show_commands() {
    local commands; commands=()
    _describe -t commands 'imsg config help show commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__set-device_commands] )) ||
_imsg__subcmd__config__subcmd__set-device_commands() {
    local commands; commands=()
    _describe -t commands 'imsg config set-device commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__setup_commands] )) ||
_imsg__subcmd__config__subcmd__setup_commands() {
    local commands; commands=()
    _describe -t commands 'imsg config setup commands' commands "$@"
}
(( $+functions[_imsg__subcmd__config__subcmd__show_commands] )) ||
_imsg__subcmd__config__subcmd__show_commands() {
    local commands; commands=()
    _describe -t commands 'imsg config show commands' commands "$@"
}
(( $+functions[_imsg__subcmd__contacts_commands] )) ||
_imsg__subcmd__contacts_commands() {
    local commands; commands=()
    _describe -t commands 'imsg contacts commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon_commands] )) ||
_imsg__subcmd__daemon_commands() {
    local commands; commands=(
'start:Start the persistent broker. Detaches into the background by default; idempotent if already running' \
'stop:Request a graceful stop. A no-op (not an error) if nothing is running' \
'status:Report whether the daemon is running and whether its MAP session is connected' \
'install:Register the daemon with the native OS service manager (systemd/launchd/OpenRC/ rc.d/sc.exe), so it starts on boot/login and restarts on failure. Optional — \`imsg daemon start\`/\`stop\` alone fully serve users who don'\''t want OS-level supervision' \
'uninstall:Unregister the daemon service. A no-op if it was never installed' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg daemon commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__help_commands] )) ||
_imsg__subcmd__daemon__subcmd__help_commands() {
    local commands; commands=(
'start:Start the persistent broker. Detaches into the background by default; idempotent if already running' \
'stop:Request a graceful stop. A no-op (not an error) if nothing is running' \
'status:Report whether the daemon is running and whether its MAP session is connected' \
'install:Register the daemon with the native OS service manager (systemd/launchd/OpenRC/ rc.d/sc.exe), so it starts on boot/login and restarts on failure. Optional — \`imsg daemon start\`/\`stop\` alone fully serve users who don'\''t want OS-level supervision' \
'uninstall:Unregister the daemon service. A no-op if it was never installed' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg daemon help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__help__subcmd__help_commands] )) ||
_imsg__subcmd__daemon__subcmd__help__subcmd__help_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon help help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__help__subcmd__install_commands] )) ||
_imsg__subcmd__daemon__subcmd__help__subcmd__install_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon help install commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__help__subcmd__start_commands] )) ||
_imsg__subcmd__daemon__subcmd__help__subcmd__start_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon help start commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__help__subcmd__status_commands] )) ||
_imsg__subcmd__daemon__subcmd__help__subcmd__status_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon help status commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__help__subcmd__stop_commands] )) ||
_imsg__subcmd__daemon__subcmd__help__subcmd__stop_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon help stop commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__help__subcmd__uninstall_commands] )) ||
_imsg__subcmd__daemon__subcmd__help__subcmd__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon help uninstall commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__install_commands] )) ||
_imsg__subcmd__daemon__subcmd__install_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon install commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__start_commands] )) ||
_imsg__subcmd__daemon__subcmd__start_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon start commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__status_commands] )) ||
_imsg__subcmd__daemon__subcmd__status_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon status commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__stop_commands] )) ||
_imsg__subcmd__daemon__subcmd__stop_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon stop commands' commands "$@"
}
(( $+functions[_imsg__subcmd__daemon__subcmd__uninstall_commands] )) ||
_imsg__subcmd__daemon__subcmd__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'imsg daemon uninstall commands' commands "$@"
}
(( $+functions[_imsg__subcmd__delete_commands] )) ||
_imsg__subcmd__delete_commands() {
    local commands; commands=()
    _describe -t commands 'imsg delete commands' commands "$@"
}
(( $+functions[_imsg__subcmd__folders_commands] )) ||
_imsg__subcmd__folders_commands() {
    local commands; commands=()
    _describe -t commands 'imsg folders commands' commands "$@"
}
(( $+functions[_imsg__subcmd__get_commands] )) ||
_imsg__subcmd__get_commands() {
    local commands; commands=()
    _describe -t commands 'imsg get commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help_commands] )) ||
_imsg__subcmd__help_commands() {
    local commands; commands=(
'send:Send an SMS to a phone number' \
'list:List messages in a folder' \
'get:Fetch one message body by handle' \
'delete:Delete (or undelete) a message by handle' \
'contacts:Pull contacts from a phonebook' \
'threads:Group inbox and sent messages into conversation threads' \
'sync:Backfill the local store with all messages from the device since the last sync' \
'unsync:Stop using the local store for reads; synced data is preserved by default' \
'folders:List the MAP message folders on the device' \
'hub:Start the iroh hub on this machine and print the node key for spokes' \
'spoke:Manage spoke configuration for connecting to a remote hub' \
'config:Inspect or modify local configuration' \
'broker:Query the session broker' \
'__broker_serve:Internal\: session broker process, auto-started by the CLI — not for direct invocation' \
'daemon:Manage the persistent background broker (opt-in; required for GUI use)' \
'completions:Print a shell completion script to stdout, or install it directly' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd____broker_serve_commands] )) ||
_imsg__subcmd__help__subcmd____broker_serve_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help __broker_serve commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__broker_commands] )) ||
_imsg__subcmd__help__subcmd__broker_commands() {
    local commands; commands=(
'status:Report whether the broker is running and whether its MAP session is connected' \
    )
    _describe -t commands 'imsg help broker commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__broker__subcmd__status_commands] )) ||
_imsg__subcmd__help__subcmd__broker__subcmd__status_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help broker status commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__completions_commands] )) ||
_imsg__subcmd__help__subcmd__completions_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help completions commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__config_commands] )) ||
_imsg__subcmd__help__subcmd__config_commands() {
    local commands; commands=(
'show:Print the resolved configuration' \
'set-device:Persist the device MAC address to the user config file' \
'setup:Interactively pick a paired device, resolve its MAP/PBAP channels over SDP, and persist address + both channels together' \
    )
    _describe -t commands 'imsg help config commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__config__subcmd__set-device_commands] )) ||
_imsg__subcmd__help__subcmd__config__subcmd__set-device_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help config set-device commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__config__subcmd__setup_commands] )) ||
_imsg__subcmd__help__subcmd__config__subcmd__setup_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help config setup commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__config__subcmd__show_commands] )) ||
_imsg__subcmd__help__subcmd__config__subcmd__show_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help config show commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__contacts_commands] )) ||
_imsg__subcmd__help__subcmd__contacts_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help contacts commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__daemon_commands] )) ||
_imsg__subcmd__help__subcmd__daemon_commands() {
    local commands; commands=(
'start:Start the persistent broker. Detaches into the background by default; idempotent if already running' \
'stop:Request a graceful stop. A no-op (not an error) if nothing is running' \
'status:Report whether the daemon is running and whether its MAP session is connected' \
'install:Register the daemon with the native OS service manager (systemd/launchd/OpenRC/ rc.d/sc.exe), so it starts on boot/login and restarts on failure. Optional — \`imsg daemon start\`/\`stop\` alone fully serve users who don'\''t want OS-level supervision' \
'uninstall:Unregister the daemon service. A no-op if it was never installed' \
    )
    _describe -t commands 'imsg help daemon commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__daemon__subcmd__install_commands] )) ||
_imsg__subcmd__help__subcmd__daemon__subcmd__install_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help daemon install commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__daemon__subcmd__start_commands] )) ||
_imsg__subcmd__help__subcmd__daemon__subcmd__start_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help daemon start commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__daemon__subcmd__status_commands] )) ||
_imsg__subcmd__help__subcmd__daemon__subcmd__status_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help daemon status commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__daemon__subcmd__stop_commands] )) ||
_imsg__subcmd__help__subcmd__daemon__subcmd__stop_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help daemon stop commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__daemon__subcmd__uninstall_commands] )) ||
_imsg__subcmd__help__subcmd__daemon__subcmd__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help daemon uninstall commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__delete_commands] )) ||
_imsg__subcmd__help__subcmd__delete_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help delete commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__folders_commands] )) ||
_imsg__subcmd__help__subcmd__folders_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help folders commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__get_commands] )) ||
_imsg__subcmd__help__subcmd__get_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help get commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__help_commands] )) ||
_imsg__subcmd__help__subcmd__help_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__hub_commands] )) ||
_imsg__subcmd__help__subcmd__hub_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help hub commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__list_commands] )) ||
_imsg__subcmd__help__subcmd__list_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help list commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__send_commands] )) ||
_imsg__subcmd__help__subcmd__send_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help send commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__spoke_commands] )) ||
_imsg__subcmd__help__subcmd__spoke_commands() {
    local commands; commands=(
'add:Persist the hub'\''s iroh node key to the local config' \
    )
    _describe -t commands 'imsg help spoke commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__spoke__subcmd__add_commands] )) ||
_imsg__subcmd__help__subcmd__spoke__subcmd__add_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help spoke add commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__sync_commands] )) ||
_imsg__subcmd__help__subcmd__sync_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help sync commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__threads_commands] )) ||
_imsg__subcmd__help__subcmd__threads_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help threads commands' commands "$@"
}
(( $+functions[_imsg__subcmd__help__subcmd__unsync_commands] )) ||
_imsg__subcmd__help__subcmd__unsync_commands() {
    local commands; commands=()
    _describe -t commands 'imsg help unsync commands' commands "$@"
}
(( $+functions[_imsg__subcmd__hub_commands] )) ||
_imsg__subcmd__hub_commands() {
    local commands; commands=()
    _describe -t commands 'imsg hub commands' commands "$@"
}
(( $+functions[_imsg__subcmd__list_commands] )) ||
_imsg__subcmd__list_commands() {
    local commands; commands=()
    _describe -t commands 'imsg list commands' commands "$@"
}
(( $+functions[_imsg__subcmd__send_commands] )) ||
_imsg__subcmd__send_commands() {
    local commands; commands=()
    _describe -t commands 'imsg send commands' commands "$@"
}
(( $+functions[_imsg__subcmd__spoke_commands] )) ||
_imsg__subcmd__spoke_commands() {
    local commands; commands=(
'add:Persist the hub'\''s iroh node key to the local config' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg spoke commands' commands "$@"
}
(( $+functions[_imsg__subcmd__spoke__subcmd__add_commands] )) ||
_imsg__subcmd__spoke__subcmd__add_commands() {
    local commands; commands=()
    _describe -t commands 'imsg spoke add commands' commands "$@"
}
(( $+functions[_imsg__subcmd__spoke__subcmd__help_commands] )) ||
_imsg__subcmd__spoke__subcmd__help_commands() {
    local commands; commands=(
'add:Persist the hub'\''s iroh node key to the local config' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'imsg spoke help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__spoke__subcmd__help__subcmd__add_commands] )) ||
_imsg__subcmd__spoke__subcmd__help__subcmd__add_commands() {
    local commands; commands=()
    _describe -t commands 'imsg spoke help add commands' commands "$@"
}
(( $+functions[_imsg__subcmd__spoke__subcmd__help__subcmd__help_commands] )) ||
_imsg__subcmd__spoke__subcmd__help__subcmd__help_commands() {
    local commands; commands=()
    _describe -t commands 'imsg spoke help help commands' commands "$@"
}
(( $+functions[_imsg__subcmd__sync_commands] )) ||
_imsg__subcmd__sync_commands() {
    local commands; commands=()
    _describe -t commands 'imsg sync commands' commands "$@"
}
(( $+functions[_imsg__subcmd__threads_commands] )) ||
_imsg__subcmd__threads_commands() {
    local commands; commands=()
    _describe -t commands 'imsg threads commands' commands "$@"
}
(( $+functions[_imsg__subcmd__unsync_commands] )) ||
_imsg__subcmd__unsync_commands() {
    local commands; commands=()
    _describe -t commands 'imsg unsync commands' commands "$@"
}

if [ "$funcstack[1]" = "_imsg" ]; then
    _imsg "$@"
else
    compdef _imsg imsg
fi